Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 93)

93
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en Area
The following format will be
used to record calculated
area results:
WI 41: Code block identification
(default = 36)
WI 42: Number of segments used.
WI 43: Area in the current
measurement units, always
with one decimal
place.
WI 44: Length of perimeter in the
current units of measure
with one decimal place.
Generate a plot of the area.
Exit the program.
Plot
Shows a plot of the present area.
Return to the dialog
"RESULTS".
Calculation, continued
Code
(default = 36)
no. of
segments
=4
area polygon
4500.3 m 2
length polygon
perimeter
WI 41 WI 42 WI 43 WI 44
AREA\ PLOT
CONT
MC