Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 235)

235
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en Road+
Cross Sections
Header of the Cross Section File:
Geometric elements supported:
41....+00JOB_ID 42....+TEMPLATE
WI 41 Job identification. Max. 8 ASCII characters, user definable.
WI 42 Template file identification. May not be changed by user.
Element Definition
Height differences Height difference from the centerline
Distance Horizontal distance from the centerline
Cross section type Differentiate between CUT and FILL cross sections
Slope Slope ratio