Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 263)

263
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en TQM
Accept settings and measure
points on the plane.
Measure additional points to
define plane.
Measure point to offset plane
through.
Show the results of each
definition point (see "Results"
dialog).
Define new plane.
Define Instrument Plane, continued
Point Measurement
The coordinates shown for the points
are in the instrument coordinate
system. Keys are the same as for
"Local".
REFP\ Reference Plane
Point Id : 5
Refl. Ht : 0.000 m
East : 1405.211 m
North : 2210.541 m
Elev. : 125.201 m
∆∆∆∆∆ d : ----- m
MC
ALL DIST REC CONT DEF
East
East coordinate of point. Changes
with telescope movement.
North
North coordinate of point. Changes
with telescope movement.
Elev.
Elevation of point. Changes with
telescope movement.
∆∆∆∆∆
d
Distance from point to plane. "-----"
unless a distance was measured.