Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 77)

77
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en Reference Line
Log File
If "Log File" is set to ON the
measurements and the results are
stored in the ASCII-file specified
within the "Configuration Editor". This
file is created in the directory LOG on
the memory card. Subsequently, you
can read the memory card on your
PC and obtain a hard copy of the
Log-file.
Data will always be
appended to the specified
Log-file.
The Log-file contains the following
information:
Header
The header line will contain the
program used, information about the
instrument, the name of the data file
as well as dateand time.
Configuration
Each modification of baseline and
reference line is stored.
Record
For each measurement, a record will
be stored containing: Point No., as-
staked Easting, Northing, and
Elevation and their delta values.