Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 135)

135
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en Traverse
Multiple Measurement
The measurement to a point can be
repeated as often as desired to
achieve a higher accuracy or
reliability. The mean value of the
measurements and the respective
standard deviation is displayed.
σ σ σ σ σ
Hz
Standard deviation of the horizontal
direction for a single measurement.
σ σ σ σ σ
V
Standard deviation of the vertical
angle for a single measurement.
σ σ σ σ σ
Slope Dist
Standard deviation of the slope
distance for a single measurement.
Ø Hz
Mean value of the Hz-
measurements.
Ø V
Mean value of the V-measurements.
ØSlope Dist
Mean value of the slope distances.
Point no.
The target point number.
No. of Meas
Counter of the measurements.
Further measurements.
Delete all measurements of
the current point and start
again.
Record the mean value of the
measurements on the active
recording device. Return to the
"TRAVERSE MENU" dialog.
Enter target data.
(see User Manual)
Accept the mean values and
return to the "TRAVERSE
MENU".
ØV : 103°45'25''
ØSlopeDist: 50.125 m
Trav\ Multiple Meas
Point No. : 500
No. of Meas : 1
σσσσσ Hz : 0°00'00''
σσσσσ V : 0°00'00''
σσσσσ SlopeDist: 0.001 m
ØHz : 45°00'52''
MC
MEAS CLEAR REC TARGT ACCEP