Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 130)

130
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en Traverse
Traverse Point / Sideshot Point
Only one Traverse Point may be
measured to (distance required) from
any given Occupy Station. As many
Sideshot Points as desired may be
measured (distance required).
This corresponds to the TPS1100
Professional series "MEASURE"
dialog. After the measurement, the
program continues either with
"MULTIPLE MEAS" or with the
"TRAVERSE MENU" according to the
settings in the configuration.
Simultaneously measure and
record data in the Meas Job.
Measure a distance
and record data in the
Meas Job.
Measure a distance
without recording in
the Meas Job.
Proceed to the dialog
"TRAVERSE MENU".
Enter target data.
(see User Manual)
Change the theodolite
face.
I<>II QUIT
East : ----- m
North : ----- m
Elevation : ----- m
Trav\Measure Traverse Point
Point Id : 2
Refl. Ht. : 1.300 m
Hz : 249°10'20''
V : 90°19'52''
Slope Dist: ----- m
Height Dif: ----- m
MC
ALL DIST REC CONT TARGT