Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 63)

63
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en Free Station
If "Log File" is set to ON the
measurements and the results are
stored in the ASCII-file specified
within the "Configuration Editor". This
file is created in the directory LOG on
the memory card. Subsequently, you
can read the memory card on your
PC and obtain a hard copy of the
Log-file.
Data will always be
appended to the specified
Log-file.
The Log-file contains the following
information:
Header
The header line will contain the
program used, information about the
instrument, the name of the data file
as well as date and time.
Log File
Record
For each measurement, a record will
be stored containing :
- Station coordinates and
- orientation correction,
- standard deviations for
Easting,
Northing,
Height of station
and orientation correction.
The residuals for
- horizontal angles,
- heights and
- measured distances
are also listed.