Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 48)

48
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en Stakeout
Select Stakeout Method
Select the stakeout
method in any stakeout
dialog.
STAKE\ Select Method
CoarseMode: LINE OFFSET
StakeMode : POLAR STAKEOUT
Auto Pos. :
2D
Ht. Offset: 0.000 m
Graphics : 2D
Symbols : FROM STA.( )
CONT POLAR ORTHO AUX GRID
MC
QUIT
Simultaneously measure and
record data in the
measurement job.
Measure a distance.
Record the measurement in
the measurement job.
Acquire the next point to
stake.
Enter target data.
Re-position the telescope on
the target. Note, this function
is only available for motorized
theodolites.
Change stakeout
method.
For more information refer to chapter
"Select Stakeout Method".
Generate a plot of the
stakeout data. For
more information refer to chapter
"Plot".
Exit the program.
Stakeut from Coordinate Differences, continued
Coarse Mode
Select the mode for "COARSE
POSITIONING":
NONE
no Coarse mode
used
LINE OFFSET see chapter "Line
Offset"
ORTHOGONAL see chapter
"Orthogonal"
AZIMUTH & DISTANCE
see chapter
"Azimuth and
Distance"