Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 152)

152
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en COGO
Station coordinates and
orientation need to have
been set correctly before the
coordinates of point 1 (and/or 2) can
be determined by measurement.
Call up the function "Bearing-
Bearing" from the menu
"Intersections".
If "Bearing" is selected in the
configuration for "Direc. Type:", then
the following dialog box appears:
Quadrant
Enter quadrant (First or second
straight lines)
1 = Northeast
2 = Southeast
3 = Southwest
4 = Northwest
Bearing-Bearing Intersection, continued
Measuring the first (second)
point of the straight line.
Manual entering of the first
(second) point of the straight
line.
Search and display the
coordinates of the point found
in the active data job.
Exit the program.
Search for the coordinates of
the first (second) point in the
datajob.
COGO\ 1st Bearing From
Data Job : FILE02.GSI A:
Search for: PointId+E+N
PointId : 58
SEARC MEAS INPUT VIEW
MC
QUIT
COGO\ Bearing #1
Direction from 1st point
Quadrant : 1
NorthEast : 0°00’00’’
Offset : 0.000 m
CONT INV
MC
MODIF QUIT