Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 163)

163
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en COGO
Manual entering of the
baseline start point resp. the
baseline end point (or the lateral
point).
Search and display the
coordinates of the point found
in the active data job.
Exit the program.
The following dialog box shows the
results:
Point Id
Entering point number of the base
point
East
Display of east coordinate
North
Display of north coordinate
Elevation
Entering height (optional)
Distance
Display difference in length/abscissa
(Horiz. Dist.)
Offset
Display lateral deviation/ordinate
(Offset)
Return to the menu
"Offsets".
Entering the new lateral point
with reference to the already
existing basis line.
The following results have
been stored in the active
measurement data file:
WI 11 Station Point Number
WI 81 Easting coordinate
WI 82 Northing coordinate
WI 83 Elevation (optional)
If "Point Id" has not been entered, the
function is not available.
Distance-Offset, continued
COGO\ Offset Results
Point Id : -----
East : 0.000 m
North : 0.000 m
Elevation : -----
Distance : 0.000 m
Offset : 0.000 m
CONT NEW STORE STAKE
MC
QUIT