Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 128)

128
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en Traverse
Simultaneously measure and
record data in the Meas Job.
Measure a distance 1
and record data in the
Meas Job.
Measure a distance
without recording in
the Meas Job.
Proceed to the dialog
"TRAVERSE MENU".
Enter target data.
(see User Manual)
Change the theodolite
face.
1 Distance measurement is optional.
• Enter Backsight Azimuth
This dialog corresponds to the TPS
1100 Professional series
"MEASURE" dialog with the
additional entry of the backsight
azimuth.
On completion of the first
measurement, the program
continues either with "MULTIPLE
MEAS" or with the "TRAVERSE
MENU" according to the settings in
the configuration.
BS Azimuth
Enter the backsight azimuth for the
orientation.
Simultaneously measure and
record data in the Meas Job.
Measure a distance 1
and record data in the
Meas Job.
Measure a distance
without recording in
the Meas Job.
Enter target data.
(see User Manual)
Change the theodolite
face.
1 Distance measurement is optional.
New traverse, continued
Trav\ Start Traverse
Measure Backsight Point
BS Azimuth:
----- g
Point Id : 500
Refl. Ht. : 1.300 m
Hz : 249°10'20''
V : 90°19'52''
ALL DIST REC CONT TARGT
MC
I<>II QUIT
Slope Dist: ----- m
Height Dif: ----- m
East : ----- m
North : ----- m
Elevation : ----- m