Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 136)

136
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en Traverse
Log File
If "LOG FILE" is set to ON, the
measurements and the results are
stored in the LOG FILE specified
within the "Configuration Editor". This
file is created in the directory LOG on
the memory card. Subsequently, you
can read the memory card on your
PC and obtain a hard copy of the
Log-file.
Data will always be
appended to the specified
Log-file.
The Log-file contains the following
information:
Header
The header line will contain the name
of this program, information about the
instrument, the name of the data file
and date and time.
Record
Computed coordinates of traverse
points are continously stored. The
option Close traverse in the
"TRAVERSE MENU" displays and
stores at any time the coordinate -
differences of traverse points of
which the coordinates are known.