Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 173)

173
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en Road+ File Editor
Tapered Transitions
Specify the ending station of the first
Cross Section equal to the station at
the beginning of the transition. Then,
specify the beginning station of the
second Cross Section equal to the
station at the end of the transition.
The transition may change the width
and/or the shape (i.e. superelevation)
of the project.
The Cross Sections at both
ends of the transition must
contain exactly the same number of
elements.
Path:
The PC Card in your TPS1100
Professional Series Instrument is the
A:\ drive. Select any existing directory
on the card to create new Road+
files, or select any existing directory
containing existing files that you wish
to edit.
File Type:
Select the type of file you wish to
create or edit with Road+ File Editor.
Open file
Start program "FILE EDITOR" from
the "MAIN MENU: PROGRAMS"
dialog. Coordinate
Refer to the chapter "Coordinate
Data files", page 168, in this
manual for further details.
Horiz. Align
Refer to the chapter "Horizontal
Alignment Files", page 173, in this
manual for further details.
Vert. Align
Refer to the chapter "Vertical
Alignment Files", page 178, in this
manual for further details.
Cross Section
Refer to the chapter "Cross
Sections Files", page 184, in this
manual for further details.
Cross Section Assignments, continued
REdit\ Open File
Road Date File-Editor
Dir. : ...\...\GSI\
File Type : Coordinate
File Name : FILE01.GSI
CONT CREAT INFO
MC
QUIT