Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 172)

172
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en Road+ File Editor
You may insert new Station
Equations and delete and/or edit
existing Station Equations with
Road+ File Editor.
Station Equations are identified by a
number, the Ahead Station and the
Back Station. "Gap" and "Overlap"
station equations are supported by
Road+ and Road+ File Editor.
Gap Equations
0+00 1+00 2+00 3+00
+-----+-----+-----+-----+-----+----...
5+00 6+00 7+00 etc.
In this Gap Equation example, the
Ahead Station is 5+00 and the Back
Station is 3+00.
Station Equations
Overlap Equations
0+00 1+00 2+00 3+00
+-----+-----+-----+-----+-----+----...
1+00 2+00 3+00 etc
In this Overlap Equation example, the
Ahead Station is 1+00 and the Back
Station is 3+00.
Cross Section Assignments
You may insert new Cross Section
Assignments and delete and/or edit
existing Cross Section Assignments
with Road+ File Editor.
Cross Section Assignments define
which Cross Section controls the
shape of the project at which station.
You may assign a Cross Section to
any portion of an alignment by
entering the starting and ending
stations for which the Cross Section
controls the shape of the project.
Abrupt and tapered transitions
between Cross Sections are
possible.
Abrupt Transitions
Specify the ending station of the first
Cross Section. Then, specify the
beginning station of the second
Cross Section the smallest possible
station increment ahead (typically
0.001 ft. or m.)