Sessions, A.2.1, Start an sd session – NewTek TriCaster 855 User Manual
Page 307: A.2.2, Start an hd session
Page | 291
A.2 SESSIONS
SUPPLEMENTARY QUESTION:
Q: What is a session?
A: Sessions can be thought of as ‘top-level presets’. They store all of the settings, playlists,
device configurations, and so on for a given live production. See Section 5.1.
A.2.1 START AN SD SESSION?
1. Connect your SD sources to TriCaster’s input connectors (see Section 3.4)
2. Connect your SD monitors to TriCaster’s output connectors (see Section 3.8.1)
3. Select the New icon in the Home Page of the Startup Screen.
4. Click the Enter Session Name link (under Session Name at right) and supply a name for
the new session.
5. Select a Volume (hard drive) for the new session.
6. TriCaster Multi-standard only: choose your local Video Standard (NTSC, NTSC-J or PAL)
7. Choose either SD 4:3 or SD 16:9 (widescreen) for Resolution
8. Click the Start Session link (lower-right).
(See also Sections 3.10 and 5.1.)
A.2.2 START AN HD SESSION?
1. Follow steps 1-6 in the preceding section.