PLANET WGS3-2820 - Manual (Page 102)

User’s Manual of WGS3-2820/WGS3-5220
102
Figure 4-3-3 VLAN Port Configuration
4.3.1.4 VLAN Port Summary
This page shows the configured VLAN parameters.
。 Slot.Port - The interface.
。 Port VLAN ID - The VLAN ID that this port will assign to untagged frames or priority tagged frames received on
this port.
。 Acceptable Frame Types - Specifies the types of frames that may be received on this port. The options are
'VLAN only' and 'Admit All'. When set to 'VLAN only', untagged frames or priority tagged frames received on this
port are discarded. When set to 'Admit All', untagged frames or priority tagged frames received on this port are
accepted and assigned the value of the Port VLAN ID for this port. With either option, VLAN tagged frames are
forwarded in accordance to the 802.1Q VLAN specification.
。 Ingress Filtering - When enabled, the frame is discarded if this port is not a member of the VLAN with which this
frame is associated. In a tagged frame, the VLAN is identified by the VLAN ID in the tag. In an untagged frame, the
VLAN is the Port VLAN ID specified for the port that received this frame. When disabled, all frames are forwarded
in accordance with the 802.1Q VLAN bridge specification. The factory default is disabled.