PLANET WGS3-2820 - Manual (Page 207)

User’s Manual of WGS3-2820/WGS3-5220
207
4.6.1.4 IP Interface Secondary Address Configuration
Figure 4-6-4 IP Interface Secondary Address Configuration
Selection Criteria
。 Secondary Address - The IP Address for which data is to be displayed. Create must be selected to add a
secondary address to the interface.
Configurable Data
。 IP Address - Enter the IP Address for the interface. This value is readonly once configured.
。 Subnet Mask - Enter the subnet mask for the interface. This is also referred to as the subnet/network mask, and
defines the portion of the interface's IP Address that is used to identify the attached network. This value is readonly
once configured.
Non-Configurable Data
。 Slot/Port - The interface for which data is to be displayed or configured.
。 Primary IP Address - The Primary IP Address for the Interface.
Command Buttons
。 Submit - Update the switch with the values on this screen. If you want the switch to retain the new values across a
power cycle, you must perform a save.
。 Delete - Delete the IP Address from the interface.
。 Cancel - Return to the IP Interface Configuration screen