PLANET WGS3-2820 - Manual (Page 173)

User’s Manual of WGS3-2820/WGS3-5220
173
Command Buttons
。 Submit - Send the updated configuration to the switch. Configuration changes take effect immediately. These
changes will not be retained across a power cycle unless a save is performed.
。 Delete ACL - Removes the currently selected ACL from the switch configuration.
4.5.1.2 IP ACL Summary
This page shows the configuration summary of access control list.
Figure 4-5-2 ACL Summary
Non-Configurable Data
。 ACL ID - The ACL identifier.
。 Rules - The number of rules currently configured for the ACL.
。 Slot.Port(s) - The interfaces to which the ACL applies.
。 Direction - The direction of packet traffic affected by the ACL.
Direction can only be one of the following:
。 Inbound