PLANET WGS3-2820 User Manual
Page 55
User’s Manual of WGS3-2820/WGS3-5220
55
This page includes the following fields:
Configurable Data
。
Admin Mode
- Enable/Disable the operation of the CLI Command logging by selecting the corresponding pulldown
field and clicking Submit.
Figure 4-2-19
Command Logger Configuration
4.2.5.4 Console Log Configuration
This allows logging to any serial device attached to the host.
Configurable Data
。
Admin Status
-A log that is "Disabled" shall not log messages. A log that is "Enabled" shall log messages. Enable
or Disable logging by selecting the corresponding line on the pulldown entry field.
。
Severity Filter
- A log records messages equal to or above a configured severity threshold. Select the severity
option by selecting the corresponding line on the pulldown entry field. These severity levels have been enumerated
below:
-
Emergency (0)
: system is unusable
-
Alert (1)
: action must be taken immediately
-
Critical (2)
: critical conditions
-
Error (3)
: error conditions
-
Warning (4)
: warning conditions
-
Notice(5)
: normal but significant conditions
-
Informational(6)
: informational messages
-
Debug(7)
: debug-level messages
Figure 4-2-20
Console Log Configuration
4.2.5.5 Event Log