PLANET WGS3-2820 - Manual (Page 470)

User’s Manual of WGS3-2820/WGS3-5220
470
OSPF is enabled.
▫ Format show ip ospf [<areaid>] database [{asbr-summary | external | network | nssa-external | router |
summary}] [<lsid>] [{advrouter [<rtrid>] | self-originate}]
▫ Modes Privileged EXEC
User EXEC
For each link-type and area, the following information is displayed.
Link Id Is a number that uniquely identifies an LSA that a router originates from all other self
originated LSA's of the same LS type.
Adv Router The Advertising Router. Is a 32 bit dotted decimal number representing the LSDB
interface.
Age Is a number representing the age of the link state advertisement in seconds.
Sequence Is a number that represents which LSA is more recent.
Checksum Is the total number LSA checksum.
Options This is an integer. It indicates that the LSA receives special handling during routing
calculations.
Rtr Opt Router Options are valid for router links only.
12.7.46 show ip ospf database database-summary
Use this command to display the number of each type of LSA in the database for each area and for the router. The command
also displays the total number of LSAs in the database.
▫ Format show ip ospf database database-summary
▫ Modes Privileged EXEC
User EXEC
Router Total number of router LSAs in the OSPF link state database.
Network Total number of network LSAs in the OSPF link state database.
Summary Net Total number of summary network LSAs in the database.
Summary ASBR Number of summary ASBR LSAs in the database.
Type-7 Ext Total number of Type-7 external LSAs in the database.
Self-Originated Type-7 Total number of self originated AS external LSAs in the OSPFv3