PLANET WGS3-2820 User Manual
Page 196
User’s Manual of WGS3-2820/WGS3-5220
196
4.5.5.4 Interface Configuration
Figure 4-5-29
CoS Interface Configuation
Class of Service (CoS) Interface Configuration
Selection Criteria
。
Slot/Port
- Specifies all CoS configurable interfaces. The option "Global" represents the most recent global
configuration settings. These may be overridden on a per-interface basis.
Configurable Data
。
Interface Shaping Rate
- Specifies the maximum bandwidth allowed, typically used to shape the outbound
transmission rate. This value is controlled independently of any per-queue maximum bandwidth configuration. It is
effectively a second-level shaping mechanism. Default value is 0. Valid Range is (0 to 10000000) KBPS with a step
size of 64 .The value 0 means maximum is unlimited.
Command Buttons
。
Restore Defaults
- Restores default settings.
。
Submit
- Send the updated configuration to the switch. Configuration changes take effect immediately. These
changes will not be retained across a power cycle unless a save is performed.
4.5.5.5 Interface Queue Configuration
Class of Service (CoS) Interface Queue Configuration