PLANET WGS3-2820 - Manual (Page 117)

User’s Manual of WGS3-2820/WGS3-5220
117
4.3.5.1 IGMP Snooping Configuration and Status
Use this menu to configure the parameters for IGMP Snooping, which is used to build forwarding lists for multicast traffic. Note
that only a user with Read/Write access privileges may change the data on this screen.
Figure 4-3-19 IGMP Snooping Configuration and Status
Configurable Data
。 Admin Mode - Select the administrative mode for IGMP Snooping for the switch from the pulldown menu. The
default is disable.
Non-Configurable Data
。 Multicast Control Frame Count - The number of multicast control frames that are processed by the CPU.
。 Interfaces Enabled for IGMP Snooping - A list of all the interfaces currently enabled for IGMP Snooping.
。 Data Frames Forwarded by the CPU - The number of data frames forwarded by the CPU.
。 VLAN Ids Enabled For IGMP Snooping - Displays VLAN Ids enabled for IGMP snooping.
Command Buttons
。 Submit - Update the switch with the values you entered. If you want the switch to retain the new values across a
power cycle you must perform a save. You will only see this button if you have Read/Write access privileges.