PLANET WGS3-2820 - Manual (Page 213)

User’s Manual of WGS3-2820/WGS3-5220
213
Non-Configurable Data
。 Slot/Port - The slot and port for which the information is being displayed.
。 IP Address - The IP Address of the router interface.
。 Send Version - The RIP version to which RIP control packets sent from the interface conform. The value is one of
the following:
ƒ
RIP-1 - RIP version 1 packets will be sent using broadcast.
ƒ
RIP-1c - RIP version 1 compatibility mode. RIP version 2 formatted packets will be transmitted using
broadcast.
ƒ
RIP-2 - RIP version 2 packets will be sent using multicast.
ƒ
None - RIP control packets will not be transmitted.
The default is RIP-2.
。 Receive Version - Which RIP version control packets will be accepted by the interface. The value is one of the
following:
ƒ
RIP-1 - only RIP version 1 formatted packets will be received.
ƒ
RIP-2 - only RIP version 2 formatted packets will be received.
ƒ
Both - packets will be received in either format.
ƒ
None - no RIP control packets will be received.
The default is Both.
。 RIP Admin Mode - Whether RIP is enabled or disabled on the interface.
。 Link State - Whether the RIP interface is up or down.
Command Buttons
。 Refresh - Refresh the data on the screen with the present state of the data in the switch.