PLANET WGS3-2820 - Manual (Page 268)

User’s Manual of WGS3-2820/WGS3-5220
268
。 Secondary Address - The ip address for which data is to be displayed. Create must be selected to add a
secondary address to the interface.
Configurable Data
。 IP Address - Enter the IP address for the interface. This address must be a member of one of the subnets currently
configured on the interface. This value is readonly once configured.
Non-Configurable Data
。 Slot/Port - The interface for which data is to be displayed or configured.
。 Virtual Router ID - The Virtual Router ID for which data is to be displayed or configured.
。 Primary IP Address - The Primary IP Address of the Virtual Router.
Command Buttons
。 Submit - Update the switch with the values on this screen. If you want the switch to retain the new values across a
power cycle, you must perform a save.
。 Delete - Delete the selected secondary IP Address
。 Cancel - Return to the Virtual Router Configuration screen.