PLANET WGS3-2820 User Manual
Page 279
User’s Manual of WGS3-2820/WGS3-5220
279
4.7.2.3 IGMP Interface Configuration Summary
Figure 4-6-58
IGMP Configuration Summary
o
Slot/Port
- Select the slot and port for which data is to be displayed. Slot 0 is the base unit.
Non-Configurable Data
o
Interface Mode
- The administrative status of IGMP on the selected interface.
o
IP Address
- The IP address of the selected interface.
o
Subnet Mask
- The subnet mask for the IP address of the selected interface.
o
Protocol State
- The operational state of IGMP on the selected interface.
o
Version
- The version of IGMP configured on the selected interface.
o
Query Interval
- The frequency at which IGMP host-query packets are transmitted on the selected interface.
o
Query Max Response Time
- The maximum query response time advertised in IGMPv2 queries sent from the
selected interface.