PLANET WGS3-2820 - Manual (Page 195)

User’s Manual of WGS3-2820/WGS3-5220
195
。 Traffic Class - Specify which internal traffic class to map the corresponding IP Precedence.
。 IP Precedence - Displays the IP Precedence to be mapped.
4.5.5.3 IP DSCP Mapping Configuration
This page is to configure the IP DSCP mapping on the port.
Figure 4-5-28 IP DSCP Mapping Configuation
。 Slot.Port - Select the physical interface for which you want to display or configure data. Select 'All' to set the
parameters for all ports to the same values.
。 Traffic Class - Specify which internal traffic class to map the corresponding IP DSCP.
。 IP DSCP - Displays the IP Precedence to be mapped.