PLANET WGS3-2820 User Manual
Page 85
User’s Manual of WGS3-2820/WGS3-5220
85
。
Hardware Address
- Specifies the MAC address of the hardware platform of the DHCP client.
。
Hardware Address Type
- Specifies the protocol of the hardware platform of the DHCP client. Valid types are
ethernet and ieee802. Default value is ethernet.
。
Client ID
- Specifies the Client Identifier for DHCP manual Pool.
。
Host Number
- Specifies the IP address for a manual binding to a DHCP client. Host can be set only if at least one
among of Client Identifier or Hardware Address is specified. Deleting Host would delete Client Name, Client ID,
Hardware Address for the Manual Pool and set the Pool Type to Unallocated.
。
Host Mask
- Specifies the subnet mask for a manual binding to a DHCP client. Either Host Mask or Prefix Length
can be configured to specify the subnet mask but not both.
。
Prefix Length
- Specifies the subnet mask for a manual binding to a DHCP client. Either Host Mask or Prefix Length
can be configured to specify the subnet mask but not both. Valid Range is (0 to 32)
。
Lease Time
- Can be selected as "Infinite" to specify lease time as Infinite or "Specified Duration" to enter a specific
lease period. In case of dynamic binding infinite implies a lease period of 60 days and In case of manual binding
infinite implies indefinite lease period. Default Value is "Specified Duration".
。
Days
- Specifies the Number of Days of Lease Period. This field appears only if the user has specified "Specified
Duration" as the Lease time. Default Value is 1. Valid Range is (0 to 59)
。
Hours
- Specifies the Number of Hours of Lease Period. This field appears only if the user has specified "Specified
Duration" as the Lease time. Valid Range is (0 to 1439)
。
Minutes
- Specifies the Number of Minutes of Lease Period. This field appears only if the user has specified
"Specified Duration" as the Lease time. Valid Range is (0 to 86399)
。
Default Router Addresses
- Specifies the list of Default Router Addresses for the pool. The user may specify upto 8
Default Router Addresses in order of preference.
Figure 4-2-52
DHCP Server Pool Configuration