PLANET WGS3-2820 - Manual (Page 42)

User’s Manual of WGS3-2820/WGS3-5220
42
Figure 4-2-3 System Description
4.2.3.2 Switch Configuration
This page includes the following fields:
。 Broadcast Storm Recovery Mode - Enable or disable this option by selecting the corresponding line on the
pull-down entry field. The factory default is disabled.
。 IEEE 802.3x Flow Control Mode - Enable or disable this option by selecting the corresponding line on the
pull-down entry field. The factory default is disabled.
。 Lag Static Capability Mode - May be enabled or disabled by selecting the corresponding line on the pull-down
entry field. The factory default is disabled.
Figure 4-2-4 Switch Configuration