PLANET WGS3-2820 - Manual (Page 327)

User’s Manual of WGS3-2820/WGS3-5220
327
received by the processor.
▫ Broadcast Packets Received The total number of packets received that were directed to the broadcast address.
Note that this does not include multicast packets.
▫ Packets Received With Error The number of inbound packets that contained errors preventing them from being
deliverable to a higher-layer protocol.
▫ Packets Transmitted Without Error The total number of packets transmitted out of the interface.
▫ Broadcast Packets Transmitted The total number of packets that higher-level protocols requested to be transmitted to
the Broadcast address, including those that were discarded or not sent.
▫ Transmit Packet Errors The number of outbound packets that could not be transmitted because of errors.
▫ Address Entries Currently In Use The total number of Forwarding Database Address Table entries now active on the
switch, including learned and static entries.
▫ VLAN Entries Currently In Use The number of VLAN entries presently occupying the VLAN table.
▫ Time Since Counters Last Cleared The elapsed time, in days, hours, minutes, and seconds since the statistics for
this switch were last cleared.
8.1.5 show interface ethernet
This command displays detailed statistics for a specific port or for all CPU traffic based upon the argument.
▫ Format show interface ethernet {<slot/port> | switchport}
▫ Mode Privileged EXEC
The display parameters when the argument is ' <slot/port>' is as follows:
Packets Received
▫ Octets Received - The total number of octets of data (including those in bad packets) received on the network (excluding
framing bits but including FCS octets). This object can be used as a reasonable estimate of ethernet utilization. If greater
precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled before and after a common
interval. ----- The result of this equation is the value Utilization which is the percent utilization of the ethernet segment on a
scale of 0 to 100 percent.
▫ Packets Received < 64 Octets - The total number of packets (including bad packets) received that were < 64 octets in
length (excluding framing bits but including FCS octets).
▫ Packets Received 64 Octets - The total number of packets (including bad packets) received that were 64 octets in length
(excluding framing bits but including FCS octets).
▫ Packets Received 65-127 Octets - The total number of packets (including bad packets) received that were between 65
and 127 octets in length inclusive (excluding framing bits but including FCS octets).
▫ Packets Received 128-255 Octets - The total number of packets (including bad packets) received that were between
128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
▫ Packets Received 256-511 Octets - The total number of packets (including bad packets) received that were between
256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
▫ Packets Received 512-1023 Octets - The total number of packets (including bad packets) received that were between
512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
▫ Packets Received 1024-1518 Octets - The total number of packets (including bad packets) received that were between
1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).