PLANET WGS3-2820 User Manual
Page 293
User’s Manual of WGS3-2820/WGS3-5220
293
4.7.4.2 Mrinfo Show
This screen displays the results of an mrinfo command.
Figure 4-6-69
Mrinfo Show
Non-Configurable Data
o
Router Interface
- The IP address of the router interface for which configuration information was requested.
o
Neighboring router's IP Address
- The IP address of the neighboring router.
o
Metric
- The routing metric for this router.
o
TTL Threshold
- The time-to-live threshold on this hop.
o
Flags
- The flags indicating whether the router is an IGMP querier or whether or not it has neighbors (leaf router).
Command Buttons
o
New Mrinfo
- Redirect the web browser to the Mrinfo Run screen so that you can initiate another mrinfo command.
o
Refresh
- Refresh the content of the screen with the latest data available on the router. Typically, it takes around 20
seconds to process the results after you have initiated the mrinfo command. The contents of the screen have to be
refreshed to display the latest results.