PLANET WGS3-2820 User Manual
Page 305
User’s Manual of WGS3-2820/WGS3-5220
305
o
PIMSM Admin Mode
- The administrative status of PIM-SM in the router: either enable or disable.
o
Join/Prune Interval
- The interval between the transmission of PIM-SM Join/Prune messages.
o
Data Threshold Rate
- The minimum source data rate in K bits/second above which the last-hop router will switch to
a source-specific shortest path tree.
o
Register Threshold Rate
- The minimum source data rate in K bits/second above which the Rendezvous Point
router will switch to a source-specific shortest path tree.
Command Buttons
o
Refresh
- Refresh the data on the screen with the present state of the data in the router.
4.7.6.3 PIM-SM Interface Configuration
Figure 4-6-80
PIM-SM Interface Configuration
Selection Criteria
o
Slot/Port
- Select the slot and port for which data is to be displayed or configured. Slot 0 is the base unit.
Configurable Data
o
Mode
- Select enable or disable from the pulldown menu to set the administrative status of PIM-SM in the router.
The default is disable.