PLANET WGS3-2820 User Manual
Page 87
User’s Manual of WGS3-2820/WGS3-5220
87
Command Buttons
。
Submit
- Creates/Modifies the Pool Configuration. Sends the updated configuration to the switch. Configuration
changes take effect immediately.
。
Delete
- Deletes the Pool. This field is not visible to a user with readonly permission.
#Note:
The network ip address/mask of the switch shall be within the same as ip pool.
4.2.11.3 Pool Options
DHCP Server Pool Options
Figure 4-2-54
DHCP Server Pool Options
Selection Criteria
。
Pool Name
- Shows all the existing Pool Names.
Non-Configurable Data
。
Option Code
- Specifies the Option Code configured for the selected Pool.
。
Option Type
- Specifies the Option Type against the Option Code configured for the selected pool.
•
Ascii
•
Hex
•
IP Address
。
Option Value
- Specifies the Value against the Option Code configured for the selected pool.
Configurable Data
。
Delete Option Code
- Specifies the Option Code to be deleted for the selected Pool. This field is not visible to a
user with readonly permission.
Command Buttons
。
Delete
- Deletes the Option Code for the selected Pool. This field is not visible to a user with readonly permission.