PLANET WGS3-2820 User Manual
Page 150
User’s Manual of WGS3-2820/WGS3-5220
150
selectable if the control mode is is 'auto'. If the button is not selectable, it will be grayed out. Once this button is
pressed, the action is immediate. It is not required to press the Submit button for the action to occur.
。
Submit -
Send the updated screen to the switch and cause the changes to take effect on the switch but these
changes will not be retained across a power cycle unless a save is performed.
。
Refresh -
Update the information on the page.
。
Initialize - This button begins the initialization sequence on the selected port. This button is only selectable if the
control mode is is 'auto'. If the button is not selectable, it will be grayed out. Once this button is pressed, the action
is immediate. It is not required to press the Submit button for the action to occur.
。
Reauthenticate -
This button begins the reauthentication sequence on the selected port. This button is only
selectable if the control mode is is 'auto'. If the button is not selectable, it will be grayed out. Once this button is
pressed, the action is immediate. It is not required to press the Submit button for the action to occur.
。
Submit -
Send the updated screen to the switch and cause the changes to take effect on the switch but these
changes will not be retained across a power cycle unless a save is performed.
。
Refresh -
Update the information on the page.
。
Figure 4-4-2
Port Access Control Port Configuration
4.4.1.3 Port Access Control Port Summary
This page shows the summary of the port access control configuration parameters.
。
Port -
Specifies the port whose settings are displayed in the current table row.
。
Control Mode -
This field indicates the configured control mode for the port. Possible values are:
¾
Force Unauthorized:
The authenticator port access entity (PAE) unconditionally sets the controlled port to
unauthorized
¾
Force Authorized:
The authenticator PAE unconditionally sets the controlled port to authorize.