PLANET WGS3-2820 User Manual
Page 267
User’s Manual of WGS3-2820/WGS3-5220
267
。
Advertisement Received
- The total number of VRRP advertisements received by this virtual router.
。
Advertisement Interval Errors
- The total number of VRRP advertisement packets received for which the
advertisement interval was different than the one configured for the local virtual router .
。
Authentication Failure
- The total number of VRRP packets received that did not pass the authentication check.
。
IP TTL Errors
- The total number of VRRP packets received by the virtual router with IP TTL (Time-To-Live) not
equal to 255.
。
Zero Priority Packets Received
- The total number of VRRP packets received by the virtual router with a priority of
'0'.
。
Zero Priority Packets Sent
- The total number of VRRP packets sent by the virtual router with a priority of '0'.
。
Invalid Type Packets Received
- The number of VRRP packets received by the virtual router with an invalid value
in the 'type' field.
。
Address List Errors
- The total number of packets received for which the address list does not match the locally
configured list for the virtual router.
。
Invalid Authentication Type
- The total number of packets received with an unknown authentication type.
。
Authentication Type Mismatch
- The total number of packets received with an authentication type different to the
locally configured authentication method.
。
Packet Length Errors
- The total number of packets received with a packet length less than the length of the VRRP
header.
Command Buttons
。
Refresh
- Refresh the data on the screen with the present state of the data in the switch.
4.6.9.5 VRRP Secondary Address Configuration
Figure 4-6-48
VRRP Secondary Address Configuration
Selection Criteria