PLANET WGS3-2820 User Manual
Page 288
User’s Manual of WGS3-2820/WGS3-5220
288
o
Protocol State
- The operational state of the DVMRP protocol on the selected interface, either operational or
non-operational.
o
Local Address
- The IP address used as a source address in packets sent from the selected interface.
o
Interface Metric
- The metric used to calculate distance vectors for the selected interface.
o
Generation ID
- The DVMRP generation ID used by the router for the selected interface. This value is reset every
time an interface is (re)started and is placed in prune messages. A change in generation ID informs the neighbor
routers that any previous information about this router should be discarded.
o
Received Bad Packets
- The number of invalid packets received on the selected interface.
o
Received Bad Routes
- The number of invalid routes received on the selected interface.
o
Sent Routes
- The number of routes sent on the selected interface.
o
Neighbor IP
- The IP address of the neighbor whose information is displayed.
o
State
- The state of the specified neighbor router on the selected interface, either active or down.
o
Neighbor Uptime
- The DVMRP uptime for the specified neighbor on the selected interface. This is the time since
the neighbor entry was learned.
o
Neighbor Expiry Time
- The DVMRP expiry time for the specified neighbor on the selected interface. This is the
time left before this neighbor entry will age out, and is not applicable if the neighbor router's state is down.
o
Generation ID
- The DVMRP generation ID for the specified neighbor on the selected interface.
o
Major Version
- The DVMRP Major Version for the specified neighbor on the selected interface.
o
Minor Version
- The DVMRP Minor Version for the specified neighbor on the selected interface.
o
Capabilities
- The DVMRP capabilities of the specified neighbor on the selected interface.
o
Received Routes
- The number of routes received for the specified neighbor on the selected interface.
o
Received Bad Packets
- The number of invalid packets received for the specified neighbor on the selected
interface.
o
Received Bad Routes
- The number of invalid routes received for the specified neighbor on the selected interface.