PLANET WGS3-2820 User Manual

Page 142

Advertising
background image

User’s Manual of WGS3-2820/WGS3-5220

142

Cost is zero.

。

Port ID -

The port identifier for the specified port within the selected MST instance. It is made up from the port

priority and the interface number of the port.

。

Port Up Time Since Counters Last Cleared -

Time since the counters were last cleared, displayed in Days,

Hours, Minutes, and Seconds.

。

Port Mode -

Spanning Tree Protocol Administrative Mode associated with the port or lag. The possible values are

Enable or Disable.

。

Port Forwarding State -

The Forwarding State of this port.

。

Port Role -

Each MST Bridge Port that is enabled is assigned a Port Role for each spanning tree. The port role will

be one of the following values: Root Port, Designated Port, Alternate Port, Backup Port, Master Port or Disabled

Port.

。

Designated Root -

Root Bridge for the selected MST instance. It is made up using the bridge priority and the base

MAC address of the bridge.

。

Designated Cost -

Path Cost offered to the LAN by the Designated Port.

。

Designated Bridge -

Bridge Identifier of the bridge with the Designated Port. It is made up using the bridge priority

and the base MAC address of the bridge.

。

Designated Port -

Port Identifier on the Designated Bridge that offers the lowest cost to the LAN. It is made up

from the port priority and the interface number of the port.

Figure 4-3-38

Spanning Tree MST Port Configuration/Status

Advertising
This manual is related to the following products: