PLANET WGS3-2820 User Manual
Page 90
User’s Manual of WGS3-2820/WGS3-5220
90
。
DHCPREQUEST
- Specifies the number of DHCPREQUEST messages received by the DHCP Server.
。
DHCPDECLINE
- Specifies the number of DHCPDECLINE messages received by the DHCP Server.
。
DHCPRELEASE
- Specifies the number of DHCPRELEASE messages received by the DHCP Server.
。
DHCPINFORM
- Specifies the number of DHCPINFORM messages received by the DHCP Server.
。
DHCPOFFER
- Specifies the number of DHCPOFFER messages sent by the DHCP Server.
。
DHCPACK
- Specifies the number of DHCPACK messages sent by the DHCP Server.
。
DHCPNAK
- Specifies the number of DHCPNAK messages sent by the DHCP Server.
Command Buttons
。
Refresh
- Refresh the data on the screen to the latest state.
。
Clear Server Statistics
- Reset DHCP Server Statistics.
4.2.11.7 Conflicts Information
DHCP Server Conflicts Information
Figure 4-2-58
DHCP Server Conflicts Information
Selection Criteria
。
DHCP Conflict
- Specifies whether information is to be displayed for a Specific Address Conflict or for All Address
Conflicts.
。
Conflict IP Address
- IP Address of the conflict to be shown. This field appears only if the user has selected
"Specific Address Conflict" in DHCP Conflict.
Non-Configurable Data
。
IP Address
- Specifies the IP Address of the host as recorded on the DHCP server.
。
Detection Method
- Specifies the manner in which the IP address of the hosts were found on the DHCP Server.
。
Detection Time
- Specifies the time when the conflict was detected in N days NNh:NNm:NNs format with respect to
the system up time.
Command Buttons
。
Submit
- Displays information about the chosen conflict(s).