Rockwell Automation AADvance Controller Configuration Guide - Manual (Page 100)

 

5-2 Document: 553633
ICSTT-RM405f-EN-P
Issue 07
Configuration Guide (AADvance Controller)
Example I/O Slot Configuration
In the example illustrated, the modules have been configured as follows:
 A redundant group of analogue input modules has been configured in the first
three slots.
 Two digital input modules are in the next two slots.
 There is a single digital input module.
 There is a group of two digital output modules.
 Two single digital output modules.
Important Note: For Release 1.3 you can change the I/O module configuration with
an on-line update without having to stop the running application. However, if you are
still using an earlier product release the I/O module configuration cannot be changed
with an on-line update.
Defining the I/O Hardware Architecture
The I/O hardware architecture is the physical arrangement of the I/O modules in the
AADvance controller. To define the I/O hardware architecture in the AADvance
Workbench you assign the modules to empty slot numbers on the processor I/O
buses. Use the Project Tree View to do this. If desired, you can clear an I/O slot or
move an assigned module to a different slot.