Rockwell Automation AADvance Controller Configuration Guide - Manual (Page 32)

 

2-10 Document: 553633
ICSTT-RM405f-EN-P
Issue 07
Configuration Guide (AADvance Controller)
Set Access to Floating Licenses
To set access a floating license, do the following:
1) From the Start menu select AADvance Licensing.

The AADvance License Manager dialog box opens.
2) Select the Set Floating Licenses tab.

The Primary Server Status will show Licensed.
3) Set the IP address of the primary server and the port number.
4) Click Report to claim a license.

The Primary Server Status will show Licensed.
5) Repeat this procedure to set up a secondary server if two license servers have
been set up entering the Secondary IP Address and Port number.
6) Click Report to claim a license.

The Secondary Server will show Licensed.
7) Click Close.