Rockwell Automation AADvance Controller Configuration Guide - Manual (Page 105)

 
Document: 553633
ICSTT-RM405f-EN-P
Issue 07
5-7
Resize a Group of Modules
You can reduce the size of a redundant group of modules from a triple to a double
then a double to a single module. To reduce the size do the following:
1) Select the Equipment view.
2) Right click to select Resize to
3) Select the number of modules you want to reduce or increase the size to.

One module will be removed from a group to become a single module slot or
added to become a group from a single slot.
4) Repeat as required.