Rockwell Automation AADvance Controller Configuration Guide - Manual (Page 59)

 
Document: 553633
ICSTT-RM405f-EN-P
Issue 07
4-19

After the progress bar reaches the end, it may take several minutes for the
next screen to appear.

Use the View Module Firmware Versions procedure to verify that the upgrade
has worked.
Configure Controller Type (Standard or Eurocard)
The controller can be configured as a standard AADvance controller, a Eurocard
controller or a mixture of both.
To configure the controller type, do the following:
1) Select the I/O Wiring icon .
2) Right click on Config1 (9000 Series Controller).
3) Select Set Configuration Type  Standard or Eurocard or Mixed.