Configure the serial ports – Rockwell Automation AADvance Controller Configuration Guide User Manual
Page 62
Advertising
![background image](/manuals/580880/62/background.png)
4-22
Document: 553633
ICSTT-RM405f-EN-P
Issue 07
Configuration Guide (AADvance Controller)
Configure the Serial Ports
The AADvance controller provides up to six serial communication ports, two for each
T9110 processor module present. .
The serial port settings define the protocol ('type') and the data characteristics of each
of the serial ports. To configure the serial ports do the following:
1) Select the Serial Ports tab.
The Serial Ports Editor dialog box opens.
2) Select the communication parameters from the drop down lists, click Apply.
3) To restore the default values, click Default then Apply.
Advertising