Rockwell Automation AADvance Controller Configuration Guide - Manual (Page 104)

 

5-6 Document: 553633
ICSTT-RM405f-EN-P
Issue 07
Configuration Guide (AADvance Controller)
Move a Module to a Different Slot
To move an assigned module to a different slot do the following:
1) Select the Equipment tab.
2) Right-click to select the Move To option.
3) Move the cursor to the right and select the IO Bus 1 Position you want to move
to.

The module is automatically re-assigned to the selected slot.
Note: The channel variable wiring will move with the module to the new slot and is
automatically renumbered.