Rockwell Automation AADvance Controller Configuration Guide - Manual (Page 146)

 

5-48 Document: 553633
ICSTT-RM405f-EN-P
Issue 07
Configuration Guide (AADvance Controller)
Unwire Status Variables from a Digital Output Module
To disconnect a status variable from a digital output module do the following:
1) Select the Variables tab of the 9451 Module Editor.

The 9451 Variables Editor dialog box opens.
2) Select the relevant rack.

The editor displays a list of associated variables.
3) Select the variable to be unwired, click the X button.
4) Click Apply.

The variable will be unwired.
Note: Select the Unwire All button and click Apply to disconnect all of the wired
variables in the rack.
Status Booleans
The variables in the rack of status booleans provide information to the application
about the field power supplies to a group of digital output modules.