Rockwell Automation AADvance Controller Configuration Guide User Manual
Page 132
Advertising
5-34
Document: 553633
ICSTT-RM405f-EN-P
Issue 07
Configuration Guide (AADvance Controller)
8) Select the button and choose the T9K_AI_HART variable.
9) Repeat this procedure for the other channels that will use HART enabled devices.
Configure HART Passthrough
AAdvance can be used to provide access to HART Field Devices connected to
Analogue Input and Analogue Output channels from an ASM package. Rockwell
provides an AADvance DTM (T9033) which provides the communication framework
allowing an AMS System to connect via the AADvance controllers Ethernet port,
enabling users to directly communicate with HART field devices connected to its
modules.
A typical set up is shown below:
Advertising