Rockwell Automation AADvance Controller Configuration Guide - Manual (Page 61)

 
Document: 553633
ICSTT-RM405f-EN-P
Issue 07
4-21
Set PST to its Default Value
You can reset the PST to its default value, do the following:
1) Select the 9110 Processor in the Equipment tree view.

The 9110 Module Editor opens.
2) Select the 9110 tab.
3) Clear the entry in the Process Safety Time field.
4) Press return.

The Process Safety Time will change to its default value.
Configure the Processor Battery Alarm
The 9110 Module Editor includes a configuration setting for the battery alarm. It can
be set to Enabled or Disabled as required.
1) Select the 9110 Processor in the Equipment view.
2) Select the 9110 tab on the 9110 Module editor .
3) Select the Battery Alarm row and the required option.