Rockwell Automation AADvance Controller Configuration Guide - Manual (Page 246)

 

10-12 Document: 553633
ICSTT-RM405f-EN-P
Issue 07
Configuration Guide (AADvance Controller)

The Binding Dialog box opens.
6) Select the Producing variable from the drop down list and the Consuming
variable from the drop down list.
7) Select the SNCP_Workbench (SNCP) from the Network Instances , click
OK.
When two networks have been set up and dual IP Addresses set up for each
resource then when you select from field on the Bindings List dialog box grid
the Binding dialog box is opened with a choice of two Network instances as
follows: