Rockwell Automation AADvance Controller Configuration Guide - Manual (Page 234)

 

9-48 Document: 553633
ICSTT-RM405f-EN-P
Issue 07
Configuration Guide (AADvance Controller)
Remove all Slave Links
You can remove all the slave links associated with a single Modbus master object. Do
the following:
1) Select the Equipment tab on the Project tree view and locate the Modbus master
object.
2) Right-click on the Modbus master object and select Remove All Slaves.

All the slave links associated with the master are removed.
Remove a Modbus Master Object
You can remove an unwanted Modbus master object.
To remove the object do the following:
1) Select the Equipment tab on the Project tree view and locate the unwanted
Modbus master object.
2) Right-click on the Modbus master object and select Remove Master.

The Modbus master object is deleted.

All slave link objects associated with the master are also deleted.
Note: You can remove all the Modbus master objects associated with a particular
9110 processor module. Right-click on the processor item and select Remove All
Masters.