Rockwell Automation AADvance Controller Configuration Guide - Manual (Page 268)

 

11-20 Document: 553633
ICSTT-RM405f-EN-P
Issue 07
Configuration Guide (AADvance Controller)
Peer ID 1 Identity of this controller
Response Timeout 0 Default
Refresh Timeout 2000 Default
Slave Transmit timeout 500 Default
Enable Controller TRUE Enable Peer on this subnet
Master/Slave TRUE This is a Master connection
Peer List
Peer 1 10.10.2.1 Controller 1, network 1, subnet 2
Peer 2 10.10.2.2 Controller 2, network 1, subnet 2
Peer 3 10.10.2.3 Controller 3, network 1, subnet 2
Peer 4 10.10.2.4 Controller 4, network 1, subnet 2
Peer 5
Peer 6
Peer 7
Network Set Up - Network 1, Subnet 1
The following are the values that should be entered during the set up process to
configure an example Peer-to-Peer network.
Table 39: Controllers 1, 2 and 3
Controller 1 Controller 2 Controller 3
dxpnc40
Network interface A A A
Network Identity 1 1 1
Subnet Identity 1 1 1
Peer ID 1 2 3
Response Timeout 0 0 0
Refresh Timeout 2000 2000 2000
Slave Transmit Timeout 500 500 500