Rockwell Automation AADvance Controller Configuration Guide - Manual (Page 116)

 

5-18 Document: 553633
ICSTT-RM405f-EN-P
Issue 07
Configuration Guide (AADvance Controller)
Wire Variables to Digital Output Channels
To wire variables to digital output channels do the following:
1) Select a digital output module on the I/O bus.

The module status variable <tagname> appears in the Variable field.
2) Select the channel that you want to wire to a variable.
3) Click the button next to the Channel Variable fields.
4) Choose a data structure from the three options displayed: Simple, Compact,
Full.

The Select Variables dialog box is displayed.
5) Select a named structure, click OK.
6) Repeat steps 2 to 5 for each channel.